Tone ID Prole
Range: 1, 2 FE/CO, 4 FE/CO, 35 FE, 50 CO or Combined
The Tone ID menu allows you to dene how the tone of the audio varies when
dierent target characteristics are detected. This is very useful for identifying targets
close to each other.
Open the Tone ID Menu
1. From the Mode Settings menu, use the arrow down button to highlight the Tone ID
Prole option and press Select.
The current Tone ID Prole will be displayed.
2. Press Select again to display the Tone ID Prole menu with the following options:
• Prole Type
• Resize
• Change Pitch
• Play Tone
• Play All
• Exit
Prole Type
Selection of the Prole Type dictates how many dierent tonal responses there are
while detecting. The available options are:
• 1 – all targets emit a single tone
• 2 CO – targets can be two tones depending on their Co reading
• 2 FE – targets can be two tones depending on their Fe reading
• 4 CO – targets can be four tones depending on their Co reading
• 4 FE – targets can be four tones depending on their FE reading
• 35 FE – targets can be 35 tones depending on their FE reading
• 50 – targets can be 50 tones depending on their CO reading
• Combined – a combination of FE/CO tones
To change or select the Tone ID Prole Type:
1. From the Tone ID Prole menu, highlight and select the Prole Type.
2. Use the arrow buttons to highlight the Prole Type you require and press Select.
The selected Tone ID Prole will be displayed.
3. Press Select to conrm your choice and return to the Tone ID Prole menu.
4. Use the down arrow button to highlight Exit and press Select to return to the Mode
Settings menu.
Tone ID
ʯ Select/change the Tone ID
Profile Type
ʯ Resize sections of the Tone
ID Profile
ʯ Change the pitch of the
current Tone ID
ʯ Play the currently selected
tone
ʯ Play all tones
To Next Page
Loading...
Need help?
General
