The options are:
• O – Backlight is always o
• 10 seconds – Backlight turns on when button is pressed and automatically turns
o after 10 seconds
• 30 seconds – Backlight turns on when button is pressed and automatically turns
o after 30 seconds
• On – Backlight is always on
Pinpoint Lock
The Pinpoint trigger can be used in two ways:
• Press and hold to Pinpoint (default)
• Press to lock the detector in Pinpoint, press again to exit Pinpoint
To activate the Pinpoint Lock function, highlight the Pinpoint Lock option and press
Select.
To Next Page
Loading...
