Map Screen
Figure 2 – Example Map screen
Use the Map Screen to:
1. View your current location and GPS coordinates
2. View your GeoTrail, WayPoints, FindPoints and GeoHunts
3. Navigate to a location
4. View the status of the detector
For further information on the Map screen, see page 14.
Menu Screen
Figure 3 – Main Menu screen
Use the Main Menu screen to access all detector settings menus. The detector
settings are grouped into four categories:
1. Modes – display and edit the settings of the current search mode; select up to
ten search modes
2. GeoStore – store nds and data in the detector
3. Display – control your view of the Detect and Map screens
4. Options – adjust detector settings options
For further information on the CTX 3030 menus, see page 29.
Access the Map screen at any
time by pressing the Map button.
Map
Access the Menu screen at any
time by pressing the Menu
button.
Menu
To Next Page
Loading...
Need help?
General
