11. Commissioning
MiR250 User Guide (en) 11/2020 - v.1.3 ©Copyright 2020: Mobile Industrial Robots A/S. 138
Backups take up some of your robot's memory space. It is a good idea to
remove any old backups you are certain you will not need in the future.
For more information on how to create, roll back, and delete backups, see MiR Robot
Reference Guide on the website.
11.14 System settings
This section describes some of the commonly used system settings of MiR250 that the
commissioner must be aware of.
Only the basic system settings are explained in this section—see MiR Robot
Reference Guide on the MiR website for more information.
In System > Settings, you can access the settings of the robot. Access to the settings must be
restricted by the commissioner—see Creating user groups and users on page132.
Figure 11.22. Under System>Settings, there are several menus where you can edit your robot's settings.
To Next Page
