MIR 250 - 2.3 External parts

2. Product presentation
MiR250 User Guide (en) 11/2020 - v.1.3 ©Copyright 2020: Mobile Industrial Robots A/S. 13
2.3 External parts
This section presents the parts of MiR250 that are visible on the outside.
Figure 2.1. MiR250 external parts.
Pos. Description Pos. Description
1 Corner bumper: four pcs, one
on each corner
2 Front cover: opens to front
compartment—see Internal
parts on page21
3 Swivel wheel with foot guard:
four pcs, one in each corner
4 3D depth camera: two pcs,
both in the front—see
Obstacle detection on
page74
Table 2.1.
Identification of the external parts in Figure 2.1