MIR 250 - 6. Getting started; 6.1 In the box

6. Getting started
MiR250 User Guide (en) 11/2020 - v.1.3 ©Copyright 2020: Mobile Industrial Robots A/S. 44
6. Getting started
This section describes how to get started with MiR250.
NOTICE
To be able to use MiR250, your robot must be running software version 2.9.0
or higher.
NOTICE
Read Safety on page29 before powering up MiR250.
In some images in this section, the robot is shown with a MiR Shelf Carrier 250
top module.
6.1 In the box
This section describes the contents of the MiR250 box.