Installation
Prefabricated system cable 4 x RJ45
43
With terminal cards with 8 or more interfaces, some or all of the RJ45 sockets are assigned four-fold on
the front panel of the Mitel SMBC. With this cable they can be connected without the use of a fan-out-panel
(FOP). The cable is 6 m long and at one extremity has four RJ45 connectors on which all the pins are
wired.
Table 31: Schematic diagram of prefabricated system cable 4 x RJ45 x 8 Pin
RJ45 SignalStranded
element
Core colour Cable
designation
Pin Two-wire
connection
white 4 x.1a
blue 5 x.1b
turquoise 3 x.2a
1
violet 6 x.2b
white 1 x.3a
orange 2 x.3b
turquoise 7 x.4a
2
violet
1
8 x.4b
white 4 x.1a
green 5 x.1b
3
turquoise
2
3 x.2a
43
Not valid for USA/Canada.
Release 7.1
System Manual for Mitel SMB Controller 104