Operation and Maintenance
Event message Trigger condition
Details
63
Severity
Fan in operation (Mitel
470 only)
The fan is back in service again
after a failure.
• Parameter = 0: A fan is back in
service again.
• Parameter = 1: Second fan
back in service again.
Parameter, date,
time
critical (positive,
with match)
FIAS command buffer
full
The command buffer to the PMS
interface is full.
Date, time critical (negative,
with match)
FIAS interface usable
again
The command buffer to the PMS
interface is back below the critical
limit.
Date, time critical (positive,
with match)
Inactive radio unit port Radio unit not responding
Reason: 0: Startup running, 1: Not
registered, 2: Various nodes, 3:
Port not permitted, 4: Local power
supply, 5: Not connected, 6: Port
reset, 7: Startup error, 8: Unknown
error
Card number, port
number, radio unit
ID/reason, date,
time
Serious (negative,
with match)
Incompatible PMS
application
The external hotel management
system (PMS application) is not
suitable for communicating with the
communication server.
PMS SW version,
PMS interface
version, PMS
interface driver
version, date, time
critical (negative,
with match)
Incorrect or no wiring
adapter (Mitel SMBC
only)
There is no wiring adapter in the
wiring adapter slot or the wiring
adapter fitted is unsuitable.
Slot number, date,
time
Critical (without
match)
Insufficient bandwidth An user in an AIN is trying to set
up a connection and the bandwidth
currently available with the WAN
link is insufficient.
Link ID, WAN link
name, available
bandwidth in Kbit/
s, date, clock
Serious (without
match)
63
The node is also always indicated in an AIN.
Release 7.1
231 System Manual for Mitel SMB Controller
To Next Page
Loading...
Need help?
General
