Operation and Maintenance
6.5.1.1 Event types
Event messages have a certain severity level: Normal (blue), Serious (yellow) and Critical (red). Many
event messages have both a negative impact (error occurred) and a positive impact (error corrected).
Some event messages have no impact and, thus, no match. Severity level, positive or negative impact (if
any) and the information, if there is a match or not, are indicated in the event table.
If an SRM server is indicated as signal destination, the event message severity level results in a change
of system status. This can be seen in the SRM agent and is displayed with the corresponding colour (see
also section SRM destination).
Table 91: Event types, in alphabetical order
Event message Trigger condition
Details
63
Severity
ATAS: Connection
established
ATAS: connection (re) established Date, time critical (positive,
with match)
63
The node is also always indicated in an AIN.
Release 7.1
223 System Manual for Mitel SMB Controller
To Next Page
Loading...
Need help?
General
