Operation and Maintenance
Event message Trigger condition
Details
63
Severity
ATAS: Connection lost ATAS: connection lost Cause (0: Logoff,
1: missing cycle
signal), date, time
critical (negative,
with match)
Card in service A card that was previously out of
service is back in service again.
Number of the
expansion slot,
date, time
critical (positive,
with match)
Card out of service A card previously in operation has
stopped functioning.
Number of the
expansion slot,
date, time
critical (negative,
with match)
Card reset A reset was carried out for one
card
Number of the
expansion slot,
date, time
Serious (without
match)
Charge counter
overflow
Individual cumulative counter or
cost centre counter overflow
Cause (0: User /
1: Cost centre / 2:
Exchange line / 3:
Room), number,
date, time
Serious (without
match)
CL printer available
again
Printout on the system printer
available once again
Date, time Serious (positive,
with match)
CL printer blocked • No response from system
printer for past 4 minutes
• Printer out of paper or switched
off
Interface,
interfaces/card
number, port
number, date, time
Serious (negative,
with match)
Compatible PMS
application
The external hotel management
system (PMS application) is
suitable for communicating with the
communication server.
Date, time critical (positive,
with match)
Configuration template
available
The missing configuration template
for a Mitel SIP terminal is now
available in the communication
server file system.
Date, time Serious (positive,
with match)
63
The node is also always indicated in an AIN.
Release 7.1
System Manual for Mitel SMB Controller 224
To Next Page
Loading...
Need help?
General
