System Overview
• Phillips screwdriver size #1
2.7.3.2 Plan and order
Set up your MiVoice Office 400 project in Mitel CPQ first. As a result, you will obtain a list of needed
components, a slot usage layout, a DSP configuration table and a licence overview.
Mitel CPQ is designed to support you with the different activities in the sales and ordering process. It is a
web-based application for online usage. You can access the application through the Mitel MiAccess Portal
[2].
2.7.3.3 Download documents, system software and tools
Before you start, download the documents and applications from the proprietary Mitel sites.
Proceed as follows to organize all downloads in a common folder:
1. If your Mitel SMB Controller does not have internet access, download the latest MiVoice Office 400
application software (e.g. “mivo400-8923a0-r3.lib32_aarch64_ilp32.rpm”) and the SMB Controller
system software (e.g. “Mitel-SMBC_Management-1.1.9.1_Helium.zip”) from [2] into the folder named
Mitel.
2.7.3.4 Equip, connect and power
The Mitel SMBC is shipped with a mainboard containing a processor board and other interfaces. The
MiVoice Office 400 communication application has to be installed first.
CAUTION:
• Before you begin, read the product information and safety instructions carefully.
• To prevent ESD damage to the components, always touch the earthed metal case of the
communication server before carrying out work inside the housing. This also applies to handling
interface cards, processor cards, and system modules that are not packed inside the ESD
protective wrapping.
Release 7.1
31 System Manual for Mitel SMB Controller
To Next Page
Loading...
Need help?
General
