Mitsubishi Electric FX Series - Page 196

–
From the resulting window select the
Data_Store variable name and click Add :
–
Because the variable name “Data_Store” is an array, the system presents the entry with
a “+“ prefix. Clicking on the variable name expands the array details into the table as
shown:
–
Clicking on the “-“ Prefix collapses the array details.
–
While monitoring the variable values, enter any 10 random integer values between
-32768 to +32767 as shown below:
Array Example: Single Dimension Array Arrays
11 - 6 MITSUBISHI ELECTRIC