Now you can confirm the completion of the initial processing by issuing a PING command to the
FX
3U-ENET. The ping command is provided by Microsoft쏐 Windows. Shown below is an exam
-
ple for normal completion.
Configuring the FX3U-ENET by FX Configurator-EN Ethernet Communications
18 - 6 MITSUBISHI ELECTRIC
C:\>ping 192.0.1.254…
Remark: Execute the ping command
Pinging 192.168.1.101 with 32 bytes of data:
Reply from 192.168.1.101: bytes=32 time=1ms TTL=250
Reply from 192.168.1.101: bytes=32 time=1ms TTL=250
Reply from 192.168.1.101: bytes=32 time=1ms TTL=250
Reply from 192.168.1.101: bytes=32 time=1ms TTL=250
Ping statistics for 192.168.1.101:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss)
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms
To Next Page
Loading...
