Mitsubishi Electric MELFA FR CR800 Series User Manual

15-370 15-370
15.5.2. Change Password
This changes the password set in the controller.
Click the "Register/Change" button of the item in which the password is to be changed in the "Password Setup"
screen. Input the currently-set password set and the new password in the "Register/Change Password" screen,
and click the [OK] button.
Figure 15-38 Change Password
When the password is changed with the "All" button, it is necessary to register the same password to all items.
15.5.3. Delete Password
This deletes the password set in the controller.
Click the "Delete" button of the item to which delete the password in "Password Setup" screen. After inputting a
password set now in the "Delete Password" screen, click [OK] button.
Figure 15-39 Delete Password
When a password is deleted by the "All" button, it is necessary to register the same password to all items.

Mitsubishi Electric MELFA FR CR800 Series Specifications

General

Brand	Mitsubishi Electric
Model	MELFA FR CR800 Series
Category	Robotics
Language	English