26-628 26-628
26.3. User's Manual Reading Guide
The manual is in the DVD-ROM as an Adobe PDF file.
D:/Utility/MELFARXM/Doc/MelfaRXME.pdf
* Example for when the DVD-ROM drive is "D:”
(1) Preparation for viewing
1) Prepare computer
Prepare a computer that has a DVD-ROM drive.
2) Preparation of viewing software
Adobe Reader is required to read the User's Manual.
If neither Acrobat Reader (nor Adobe Reader) is installed, download it from the Adobe
Systems web site. (As of November 2019)
URL: http://www.adobe.com
(2) Viewing methods
1) Starting from Windows Explorer
Start Windows Explorer, then select the file. Acrobat Reader (or Adobe Reader) will start and
the user's manual displayed.
2) Starting directly from Acrobat Reader (or Adobe Reader)
Start Acrobat Reader (or Adobe Reader), then select the file to display the user's manual.
26.4. Installation
Perform installation according to the following procedure
(1) Insert the program DVD-ROM into the DVD-ROM drive of your personal computer. Setup of “RT ToolBox3”
will start automatically. Click “cancel”.
(2) Select [Run] from the [Start] button.
Windows Vista Previously used:
From [Start] button, select [Specify file name].
Figure 26-2 Selecting [Run]
When using Windows 7 or later:
Press
on the keyboard.
(3) Check the drive name of the DVD-ROM drive. Enter the following and click the [OK] button.
"Drive name":/Utility/MelfaRXM/Setup.exe
(If the DVD-ROM drive is "D", enter "D:/Utility/MelfaRXM/Setup.exe")
Figure 26-3 [Run] Screen
To Next Page
Loading...
Need help?
General
