Mitsubishi Electric MELFA FR CR800 Series User Manual

21-505 21-505
21.2. Change 3D Monitor Display Method
You can change the display method of the 3D monitor on the option screen.
Select the [Workspace] tab -> [Options] menu on the ribbon.
By checking [Always display in front] in [3D Monitor], it will always be displayed on the front from the time the next
3D monitor is started up and you can move outside the screen of RT ToolBox 3.
If you want to display the 3D monitor on the display tab and display it in line with other windows, please uncheck
the [Always display in front] check box.
Figure 21-2 Change display method of 3D monitor

Mitsubishi Electric MELFA FR CR800 Series Specifications

General

Brand	Mitsubishi Electric
Model	MELFA FR CR800 Series
Category	Robotics
Language	English