6
FUNCTIONS
6.13 Execution Time Measurement
6.13.1 Program list monitor
6 - 97
1
Overview
2
Performance
Specification
3
Sequence Program
Configuration and
Execution Conditions
4
I/O Nunber Assignment
5
Memories and Files
Handled by CPU Module
6
Functions
7
Communication using
built-in Ethernet ports of
CPU module
8
Communication with
Intelligent Function
Module
POINT
Depending on the instruction, the output may not turn OFF if "After stop, output
stop" is executed.
For details, refer to the section of the POFF instruction in the following manual.
QCPU (Q Mode)/QnACPU Programming Manual (Common Instructions)
(5) Precaution
The scan time of a constant scan execution type program being executed is not
displayed on screen, but a dash (-) is displayed in the Scan Time column.
To Next Page
Loading...
Need help?
General
