Mitsubishi Q02CPU

App
- 81
Appendix 3 Comparison
Appendix 3.1 Basic model QCPU Upgrade
APPENDICES
(2) Function comparison
: Usable/compatible, : Unusable/incompatible
*1 : When the CPU instruction installed by GX Developer Version 8 is read by GX Developer of Version 7 or earlier, it is
processed as an "instruction code error" by GX Developer.
*2 : Unsupported by the Q00JCPU.
TableApp.38 Function comparison
New Function
Function Version
Function Version A
First 5 digits of serial No. are
"04121" or earlier
Function Version B
First 5 digits of serial No. are
"04122" or later
MELSAP3
( QCPU (Q Mode)/QnACPU Programming
Manual (SFC))
Function block
( GX Developer Operating Manual (Function
Block))
Structured text (ST) language
( QCPU (Q Mode) Programming Manual
(Structured Text))
PID operation function
*1
( QCPU (Q Mode)/QnACPU Programming
Manual (PID Control Instructions))
Real number operation
*1
( Section 9.12.3)
Intelligent function module event interruption
( Section 6.23)
Device initial value automatic setting function
( Section 6.26)
Remote password setting function
( Section 6.19.2)
E-mail parameter
( Manual of the module that includes e-mail
function)
Write during RUN using pointer ( Section 6.15.2)
Increased file register R capacity (32k points to 64k
points)
*2
( Section 9.7)
Multiple CPU System compatibility
( QCPU User's Manual (Multiple CPU System))
*2
Multiple-block write during RUN
( Section 5.1.2(3)(b), Section 5.2.2(3)(b))