3
- 3
3.1 Sequence Program
3
SEQUENCE PROGRAM CONFIGURATION AND
EXECUTION CONDITIONS
3.1 Sequence Program
A sequence program is created using the sequence instructions, basic instructions,
application instructions, etc.
Remark
Refer to the following manual for the sequence instructions, basic instructions and
application instructions.
QCPU (Q Mode)/QnACPU Programming Manual (Common Instructions)
Diagram 3.3 Sequence program
T0
X0
X1
X41
M0
K100
T0
Y30
BIN K4X10 D0
FROM H5 K0 D10 K1
Sequence
instruction
Basic instruction
Application
instruction
To Next Page
Loading...
