Mitsubishi Q02CPU

6
- 91
6.15 Debug Execution by Multiple Users
6
FUNCTIONS
6.15 Debug Execution by Multiple Users
(1) Debug Execution by Multiple Users
This function performs debugging from multiple GX Developer connected to CPU
module or Serial communication module at the same time.
When a file has been divided according to the process, function, etc., the divided files
can be debugged simultaneously from multiple GX Developer.
Note6.34
Note35
(2) Function Description
The debug function combination for multiple users are as follows:
Note36
: Can be executed simultaneously. However, since the monitor condition setting
( Section 6.11.1) can be made from only one GX Developer, the monitor condition
cannot be set on other GX Developer.
Note6.36
Note37
: Can only be performed from one GX Developer.
Note35
Table6.26 Combined use of Debug function and other functions
Note6.35
Functions being
executed
Functions executed later
Monitor
Write during
RUN
Execution time
measurement
Sampling trace
Monitor
Write during RUN
Execution time
measurement
Sampling trace
Note36
Note37
Basic
Note6.34
Irrelevant to Basic model QCPU, since a file cannot be divided according to the process or
function.
Basic
Note6.34
Basic
Note6.35
The Basic model QCPU does not support sampling trace.
Basic
Note6.35
Basic
Note6.36
The Basic model QCPU does not support the monitor condition-set monitor.
Basic
Note6.36