5
- 8
5.1 Basic Model QCPU
5.1.3 Standard ROM
5
MEMORIES AND FILES HANDLED BY CPU MODULE
(4) Write to standard ROM
To write data to the standard ROM, choose [Online] [Write to PLC (Flash ROM)]
[Write the program memory to ROM...] on GX Developer. ( Section 5.1.5)
POINT
The file size has the minimum unit. ( Section 5.4.4)
The occupied memory capacity may be greater than the actual file size.
(5) How to use the program stored in the standard ROM
Since operation cannot be executed by the program stored in the standard ROM, use
that program by booting (reading) it to the program memory. ( Section 5.1.5)
To Next Page
Loading...
