9
- 73
9.7 File Register (R)
9.7.6 Precautions for using file registers
9
DEVICE EXPLANATION
2) Checking timing
• A file register capacity check should be executed at step 0 of programs in
which file registers are used.
• After switching to another file register file using the QDRSET instruction,
execute a file register capacity check.
• When using the RSET instruction to switch blocks, confirm that the
switching destination block has a capacity of 1k points or more before
executing the RSET instruction.
(File register capacity) > [32k points (switching block No.) + 1k points]
To Next Page
Loading...
