Mitsubishi Q02CPU

6
FUNCTIONS
6.12 Writing in Program during CPU Module RUN
6.12.1 Write during RUN in ladder mode
6
- 64
1
Overview
2
Performance Specification
3
Sequence Program Configuration and Execution Conditions
4
I/O Nunber Assignment
5
Memories and Files Handled by CPU Module
6
Functions
7
Communication with Intelligent Function Module
8
Parameters
(d) Write during RUN performed during execution of low speed execution type
program
Note6.20
Note20
When a low speed execution type program is being executed, the RUN write is
started once the low speed execution type program is complete. Also, the low
speed execution is stopped temporarily during a RUN write.
1) : RUN write command of scan execution type program
2) : RUN write execution of scan execution type program
3) : RUN write command of the low speed execution type program
4) : RUN write execution of the low speed execution type program
Note20
Diagram 6.41 Write during RUN processing at execution of low speed execution type program
Basic
Redundant
Note6.20
Since the Basic model QCPU and Redundant CPU cannot use low speed execution type
programs, it is not necessary to be conscious of write during RUN of low speed execution type
programs.
Basic
Note6.20
Redundant
Scan execution type
program step 0 to
END
Scan execution type
program step 0 to
END
Scan execution type
program step 0 to
END
1) 2) 3)
Low speed execution
type program step
0 to 200
Low speed execution
type program step
201 to 320
Scan execution type
program step 0 to
END
Low speed execution
type program step
321 to END
Low speed execution
type program step
0 to 120
4)
1 scan 1 scan 1 scan 1 scan