App - 127
Appendix 5 Method of replacing High Performance model QCPU with Universal model QCPU
APPENDICES
(c) Program after replacement
• Replace the IX instruction with the ZPUSH instruction and the processing for
setting the contents of index modification table to index registers.
• Replace the IXEND instruction with the ZPOP instruction.
Figure App.2 Sample program
Current index register is
saved.
Contents of the index
modification table are
set to the index
registers Z0 to Z15.
Modification target
(No change required)
The saved index register is restored.
(Transition from the IXEND instruction)
Transition
from the IX
instruction
To Next Page
Loading...
Need help?
General
