Mitutoyo CONTRACER CV-2100 - CV-2100 M4 Product Specifications

No. 99MBB793A
6-2
CV-2100M4 Product Specifications
Measuring range
X-axis
100mm (4 inch)
Z1-axis (detector)
50mm (2 inch)
Vertical travel range
350mm (13.8 inch)
X-axis inclination mechanism
±45°
Scale unit
X-axis
STVC-10Z
Z1-axis (Detector)
RT Detector
Resolution
X-axis
0.1 µm (3.93 μinch)
Z1-axis
0.1 µm (3.93 μinch)
Driving method
X-axis
Motorized drive (0 - 20mm/s 【0 - 0.79 inch/s】)
Vertical travel (column)
Manual (Quick vertical travel, Fine feed)
Speed:
0.02 - 5mm/s (0.00078 - 0.2 inch/s)
Straightness accuracy (in X-axis horizontal position)
2.5 µm/100mm (98.4 μinch / 4 inch)
Indication accuracy
(20°C)
X-axis
±(2.5+0.02L)µm ±(100 +20L)μinch
L: Measuring length (mm)
Z1-axis
±(2.5+|0.1H|)µm ±(100 +|100H|)μinch
H: Probing height within 25mm from the horizontal position (mm)
Stylus up/down
Arc motion
Measuring direction
Forward / backward direction
Face of stylus
Downward
* Measuring force
30±10mN (3gf)
Traceable angle
(with stylus supplied as a standard accessory)
Ascent: 77°, Descent: 87° (depends on the surface texture)
Stylus tip radius
25µm (1000 μinch) (with stylus supplied as a standard accessory)
Base size (width×depth)
600×450mm (23.6×17.7 inch)
Base material
Gabbro
External dimensions
(W×D×H)
Main unit
651×143×138.5mm (25.6×5.63×5.45 inch)
Stand
885×745×450mm (34.8×29.3×17.7 inch)
Mass
Main unit
5.8 kg
Stand
140 kg
Precision-assured temperature range
20°C±1°C
Assured operating temperature range
0°C to 40°C * The temperature fluctuation between calibration time and
measurement time shall be within ±1°C.
Assured operating humidity range
20 to 80%RH (with no condensation)
Storage temperature range
‒10 to 50°
Storage humidity range
5 to 90%RH (with no condensation)
Communication interface
USB
Power specification
See Table 2-1 (Page 2-2)
Airborne noise
A-weighted sound pressure level 70 dB（A） or less
CE marking / UKCA marking
EMC Directive / Electromagnetic Compatibility Regulations : EN 61326-1
Immunity test requirements: Clause 6.2 Table 2
Emission limit: Class A
Machinery Directive / Supply of Machinery (Safety) Regulations:
EN ISO 12100, EN60204-1
RoHS Directive / The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations: EN IEC 63000
* For the combination of optional accessory P/N.935120 of eccentric arm (AB-92) and P/N.354901 of knife
edge stylus (SPH-94), the measuring force may become over 40mN.