This list shows auxiliary weights which are respectively used for each combination of a
stylus and an arm when the X axis is kept horizontal or inclined ±45°.However, this is just
basic information, and the measuring force occasionally cannot be adjusted to be 30±
10mN even if an auxiliary weight is selected according to the list. In this case, re-select
an appropriate auxiliary weight, and adjust the measuring force. Furthermore, when the
X axis is kept at "＋45° to 0° (horizontal position)" and "-45° to 0° (horizontal
position)", the measuring force also needs to be adjusted to be 30±10mN by adjusting
the auxiliary weight or re-selecting an appropriate auxiliary weight.
To Next Page
Loading...
