Mitutoyo CONTRACER CV-2100 - Stand

No. 99MBB793A
1-10
1.4.2 Stand
1. Base unit
A surface plate on which workpieces and options such as 3 axes adjusting table are
placed.
2. Quick up/down handle
Moves the measuring main unit roughly and vertically.
The handle can be moved by holding it.
Important
Do not hold the quick up/down handle in the state that the measuring main unit is not
installed. Note that a strong force in upper side may be generated because it is not
balanced and it may create hazardous conditions.
3. Up/down fine feed knob
Moves the measuring main unit finely and vertically.
One rotation of the knob moves the unit by approx. 2 mm.
3
2
1
3
4
5