Mitutoyo ID-C Series - Common specifications

101
No. 99MAH056A
10Specications
■Commonspecications
Protection level
*2
IP42
*3
CE marking/
UKCA marking
EMC Directive/Electromagnetic Compatibility Regulations: EN 61326-1
Immunity test requirement: Clause 6.2 table 2
Emission limit: Class B
RoHS Directive/The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations:
EN IEC 63000
Power supply Lithium metal battery CR2032 (3.0 V)
Battery life
*4
Normal use: Approx. 2.5 years,
Continuous use: Approx. 2,700 hours
Scale Electrostatic capacitance type absolute linear encoder
Response speed Unlimited
Display of 7
segments
11 mm
Display of analog
bar
±20 scale
Display rotate 330°
Functions
Zero set, Preset, Peak detection
*5
, Counting direction
switching, Tolerance judgment, Simple calculation, Key
customize, Function lock, Auto OFF, Calibration schedule
warning display, Battery voltage decrease display, Error warning
display, Unit system switching
*6
Data output DIGIMATIC d1, DIGIMATIC d2
I/O DIGIMATIC S1
Temperature
range
Operation: 0 °C – 40 °C, Storage: -10 °C – 60 °C
Standard
accessories
User'smanualwithwarranty,Certicateofinspection,Lithium
metal battery CR2032, Battery holder opener (Part No.
21EAB049), Weight
*7
*1: During normal measurement at 20 °C.
*2: The protection level (IP: International Protection) is based on IEC 60529/JIS C0920.
*3: Values are for factory conditions.
*4: The battery life varies depending on usage times and conditions. The above values
are guidelines.
*5: The peak detection speed is 50 times/s.
*6: in/mm models only
*7: Low measuring force model only