Mitutoyo ID-C Series User Manual

66
5 Setting Parameters
No. 99MAH056A
(Short press) / (Long press)
5.11. 2 Calibration Schedule Warning Selection/Setting
By setting the current date, calibration date and advance warning date, the
warning display (
) notifying the arrival of calibration schedule will be lit on the
display.
Enable/disable calibration schedule warning function, current date, calibration
date and advance warning date can be changed.
Tips
If the power is turned ON/OFF using the [F3] key, it is not necessary to reset the
current date. However, if the battery is removed, the current date must be reset when
the power is turned on again.
2
-2
1 2
-1
2
-2
F2F2
F2
F1/F3
Go to step 3
Go to the
next item

Mitutoyo ID-C Series Specifications

General

Brand	Mitutoyo
Model	ID-C Series
Category	Measuring Instruments
Language	English