Mitutoyo ID-C Series User Manual

17
No. 99MAH056A
3 Basic Usage
(Short press) / (Long press)
3.4
Measurement Mode and Parameter Setting Mode
This product has two modes: measurement mode and parameter setting mode.
3.4.1 Measurement Mode
This mode is used for tasks such as normal measurement, calculation
measurement, tolerance judgment, holding displayed values, and outputting
displayed values to an external device.
When in measurement mode, three methods for displaying measurement values
are available for selection.
Standard 1 Standard 2 Peak detection
*1
Measured value
display
Directly displays the measured value
to be displaced.
Holds and displays
the peak value of
the measured value
to be displaced.
Display of analog bar Yes No Yes
Key customization
*2
Customizable Not customizable Not customizable
*1: For details about peak detection, see
"4.3 Peak Detection" on page 26.
*2: For details about customization, see
"4.6 Customizing Keys" on page 31.
3.4.2 Parameter Setting Mode
This mode is used to set parameters. For details, see "5 Setting Parameters"
on page 35.

Mitutoyo ID-C Series Specifications

General

Brand	Mitutoyo
Model	ID-C Series
Category	Measuring Instruments
Language	English