vi
No. 99MAH056A
About This Document
This document is intended to provide an overview of the product, the functions
of each component, setup, usage and maintenance details.
■How to read this document
53
No. 99MAH056A
5 Setting Parameters
(Short press) / (Long press)
1 Press the [F2] key.
» Calculation function can be set.
2 Setting the execution/stop of the calculation function
1 Press the [F1] key or [F3] key.
» Each time the key is pressed, it will switch execution/stop.
2 Press the [F2] key.
When execution [on] is selected:
» The calculation function display (A) blinks and the previously set calculation
Tips
When stop [oFF] is selected:
»
(Go to "5.8 Selecting Analog Bar Display" on page 56.)
3
1 Press and hold the [F2] key.
» The sign will blink and can be changed.
» Continue to 3 if not changing the sign.
2 Press the [F1] key or [F3] key.
» Each time the key is pressed, it will switch the sign.
3 Press the [F2] key.
»
4 Press the [F1] key or [F3] key.
» Each time the key is pressed, the value will change by one.
5 Press the [F2] key.
»
» Each time the key is pressed, the blinking digit moves to the right.
Repeat steps 4 to 5
(e.g.: -6.4641).
»
6
»
(Go to "5.8 Selecting Analog Bar Display" on page 56.)
Indicates an operating
procedure to be performed or
its outline.
Indicates supplementary
information.
Indicates the reference
location.
Indicatesspecicwork
procedures.
To Next Page
Loading...
Need help?
General
