1
No. 99MAH056A
1 Overview
1
Overview
1.1
Overview of This Product
This product is a Digimatic indicator that digitally displays the amount of
plunger displacement. It is available in two types: the standard type and the low
measuring force type.
It has the following features.
y It is equipped with a display function for tolerance judgment results. (
"4.4
Tolerance Judgment" on page 29)
y It can hold the peak values of the displaced measured values (runout,
maximum value, minimum value). (
"4.3 Peak Detection" on page 26)
y It provides an analog bar display that makes it easy to check the approach to
the origin and tolerance values. (
"1.2.2 Display (LCD)" on page 4)
y Depending on how this product is used, it is possible to customize the
functions assigned to short-pressing of each key ([F1] key, [F2] key, [F3] key).
(
"4.6 Customizing Keys" on page 31)
y Various settings can be made externally using the serial communication
function.
(
"9 Input/Output Functions" on page 89)
To Next Page
Loading...
Need help?
General
