Mitutoyo ID-C Series - Display Value Hold

30
4 Measurement Method
No. 99MAH056A
(Short press) / (Long press)
4.5
Display Value Hold
Ifanexternaldeviceisnotconnected,thedisplayedvaluecanbeheld(xed).
Tips
During tolerance judgment enlarged display, the Hold function will not work. For
information on the tolerance judgment enlarged display, refer to
"4.4 Tolerance
Judgment" on page 29.
1 2
F3 F3
1 Press the [F3] key.
» Hold display ([H]) will appear and the displayed value will be held (the displayed
value will be retained even if the workpiece is removed).
2 Press the [F3] key while the displayed value is held.
» Holddisplay([H])turnso󰀨andholdisreleased(displayscurrentplungerposition).