15
No. 99MAH056A
3 Basic Usage
(Short press) / (Long press)
4 Press the [F2] key.
When the calibration schedule warning function is OFF:
» The mode switches to measurement mode (current position display).
Measurement mode
(current position display)
When the calibration schedule warning function is ON:
» The current date is displayed.
Pressthe[F2]keytoconrmthecurrentdate.(Example:August25,2020)
F2 F2 F2
Measurement mode
(current position display)
YY MM DD
Tips
• To change the date, refer to step
3
in
"5.11.2 Calibration Schedule Warning
Selection/Setting" on page 66.
• For details on turning the calibration schedule warning
ON and OFF, refer to
"5.11.2 Calibration Schedule Warning Selection/Setting"
on page 66.
• When the battery is replaced, the measurement mode will use the same display
method and measurement system used prior to removing the battery.
Examples: Peak detection, absolute measurement (ABS)
• Dispose of batteries in accordance with the law and any other regulations.
To Next Page
Loading...
Need help?
General
