Operating the unit
40 Operating instructions
5.5.2 Changing the basic settings
The basic settings for operation can be displayed, changed and
exported by entering the password "111".
Opening the Setting menu
Requirement
Equipment function
menu open
1. Tap the "Equipment settings" field.
The
PIN
window opens.
2. Enter the password.
3. Tap the
Confirm
button.
The
Equipment settings
menu is displayed.
The basic settings can be changed.
In addition to those described in this chapter, there are the
following further functions.
Audio settings
Selection of the volume of the signal tones.
Operation lock
Various settings depending on whether and when the operation lock
is to be activated.
Entering and changing the code word.
CombiDoctor
CombiDoctor uses a selectable self-diagnostic program to check the
components for climate control and cleaning.
Delete user's own cooking programs
Delete all the cooking programs created by the user.
Set the units
Set the units for temperature and liquid quantities.
The possibilities for temperature are °C and °F.
The possibilities for volume are ml, fl.oz (Imp.) and fl.oz (US)
10013865-0ABBE-B
To Next Page
Loading...
