Cleaning and caring for the unit
82 Operating instructions
6.11.4 Starting automatic cleaning
Requirement Water connection is open
The unit is on
Cleaning level selected
Cooking zone temperature at 60 °C
Tap the "START STOPP" button.
The display shows the remaining time.
6.11.5 Cancelling automatic cleaning
1. Tap the "STOPP" button.
Automatic cleaning is cancelled.
Automatic rinsing starts and cannot be cancelled.
Upon completion, a request appears to remove the cartridge.
2. Remove the cartridge.
6.11.6 Ending automatic cleaning
Requirement Automatic rinsing has stopped after the cleaning program was
cancelled or the cleaning time has elapsed
1. Open the cooking zone door.
2. Remove the empty cleaning cartridge.
3. Use the hand-held shower to thoroughly flush away any remaining
cleaner or rinsing agent.
CAUTION
Risk of chemical burns
Droplet quantities can contain caustic constituents, so suitable
protective measures must be taken.
4. Flush away any droplets of cleaning water on the floor in front of
the unit with a soft water jet.
5. Leave the cooking zone door open slightly until the unit is to be
used again.
This extends the service life of the door seal.
No moisture builds up in the cooking zone.
10013865-0ABBE-B
To Next Page
Loading...
