MKN FKECOD615T - 7 Troubleshooting; Emergency Mode Operation; Causes of Errors and Remedies (Part 1)

Troubleshooting
88 Operating instructions
7 Troubleshooting
If a fault occurs during operation, the error number and error
message are displayed.
Use CombiDoctor to analyse the cause, if the cooking result or
cleaning with WaveClean is different from that expected, and if an
error message is not displayed.
7.1 Emergency mode
Emergency programs handle the limited further operation of the
appliance until servicing. Deviating cooking results and
temperature deviations are possible.
In order to allows limited use in case of error, the unit has several
different emergency programs. Emergency operation is activated
automatically and displayed. After elimination of the error indicated,
the controls switch back into normal operation automatically. A reset
is not necessary.
7.2 Causes of errors and remedies
Fault
no.
Error message
displayed
Description Measure to be taken
694
695
• Cooking zone
sensor is defect-
ive
The internal core
temperature sensor
takes over the
function of the
defective cooking
zone sensor.
• Insert the internal
core temperature
sensor into its
holder.
• A different cooking
result may occur.
• Contact Customer
service.
696
728
• Top cooking
zone sensor is
defective
The bottom cooking
zone sensor takes
over the function of
the defective top
cooking zone sensor.
• A different cooking
result may occur.
• Contact Customer
service.
697
729
• Bottom cooking
zone sensor is
defective
The top cooking zone
sensor takes over the
function of the
defective bottom
cooking zone sensor.
• A different cooking
result may occur.
• Contact Customer
service.
699
700
714
716
• Internal core
temperature
sensor is defect-
ive
The internal core
temperature sensor in
the cooking zone is
deactivated.
• If possible, use the
external core tem-
perature sensor
(optional).
• Select another
cooking program.
• Contact Customer
service.
10013865-0ABBE-B