MKN FKECOD615T - Retrieving Equipment Information; Setting the Date and Time

Operating the unit
42 Operating instructions
5.5.3 Retrieving equipment information
The equipment information contains details about the software
and hardware version, the serial number of the unit and contact
details.
Requirement The Setting menu is displayed
Tap the "Equipment information" field.
The Equipment information window is displayed.
Equipment information can now be read.
5.5.4 Setting the date and time
Observe the displayed date and time format carefully. If values
are invalid, the entry is not accepted.
Requirement The Settings menu is displayed
1. Tap the "Set date and time" field.
The Setting window opens.
The keypad opens.
2. Enter the date and time.
3. Tap the Confirm button.
The keypad closes.
The date and time are set.
10013865-0ABBE-B