Operating the unit
46 Operating instructions
5.5.9 Possible settings in the parameter level
Requirement The
Settings
menu is displayed
1. Tap the "Settings parameters" field.
The
Settings parameters
menu is displayed.
2. Using a wiping gesture, set the rollers to the desired parameter.
The designation of the selected parameter is displayed.
3. Tap the "Read" button.
The current value of the selected parameter is displayed.
4. Delete the current value with the keypad.
5. Enter the new value with the keypad.
6. Tap the "Write" button.
The displayed value is adopted for this parameter.
The parameter is changed.
The unit is already preset, when it is delivered.
The values in the following list can be modified.
Basic setting No. Standard
value
Adjustment
range
Explanation
Screen lock
Screen lock 662 0 0 or 1 0 = Not activated, 1 = The "screen lock"
field is displayed in Basic settings and can
be modified.
Password 7 111 0 - 500 The password for the basic settings can be
changed in this range.
Cooking modes
Steaming temperature 9 100 30 – 130 °C When this cooking mode is selected, this
value is automatically displayed in the
adjustment range.
Combisteaming temperature 10 100 30 – 250 °C When this cooking mode is selected, this
value is automatically displayed in the
adjustment range.
Hot air temperature 11 180 30 – 250 °C When this cooking mode is selected, this
value is automatically displayed in the
adjustment range.
Regeneration temperature 12 120 30 – 200°C When this cooking mode is selected, this
value is automatically displayed in the
adjustment range.
Ready2Cook
Ready2Cook 607 1 0 or 1 0 = Not activated, 1 = Activated
Ready2Cook preheating
temperature in percent
4 15 0 – 30% If the unit is fully loaded with a large mass
(roasts, loaves of bread), increase the
preheat temperature so that the cooking
zone temperature does not drop too
suddenly.
Cooking
10013865-0ABBE-B
To Next Page
Loading...
