11BAppendix C: Command Summary 83BSupported Service Summary
105
Table 52: Supported Service Summary (continued)
Service
ID #
(hex)
Service
Name
Parameter
Data
Type(s)
Service
Type Description
Object
Models
05 Reset USINT Request Places the object
into its Initializing
state.
0E Get_Attribute_Single USINT Request Reads the object
attribute.
10 Set_Attribute_Single USINT,
Attribute
Data Type
Request Modifies the object
attribute.
* DeviceNet common services.
Reset
The Reset service (ID #05) places the object instance into its Initializing state. This service is
valid for the Identity, Connection, and S-Device Supervisor Objects. The parameter for the Reset
service indicates the type of reset. The device supports a parameter value of zero, which causes
the device to emulate a power cycle as closely as possible [2].
Recover
The Recover service (ID #06)—valid for the S-Device Supervisor Object—m
oves the object
instance from its Abort state to its Recovering
state. There are no parameters specified for this
service.
Abort
The Abort service (ID #07)—valid for the S-Device Supervisor Object—places the object
instance into its Abort state. There are no param
eters specified for this service.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
