MKS Baratron DMA Series - Table 30: I;O Poll Messaging Instance Attributes

74BConnection Object 7BChapter Four: Operation
62
Table 30: I/O Poll Messaging Instance Attributes
Attribute
ID # (dec) Attribute Name
Default
Value Description
1 state 01 Indicates the Poll Connection Object
is in the Configuring state.
2 instance_type 01 Indicates this is an I/O Connection.
3 transportClass_trigger 83
hex
Server/Transport Class 3.
Implementations can choose
Transport Class 3 as the default.
4 produced_connection_id — See the Slave’s I/O Poll Response
Message in Table 17, page 48.
5 consumed_connection_id — See the Master’s I/O Poll Command
Message in Table 17, page 48.
6 initial_comm_characteristics 01 Indicates (1) the Slave’s I/O Poll
Connection produces across Message
Group 1 and consumes across
Message Group 2 and (2) the Slave’s
Node Address appears in the CAN
Identifier Field of the Group 2
Message that the Slave consumes.
Refer to Table 17, page 48.
7 produced_connection_size 3* —
8 consumed_connection_size 0 —
9 expected_packet_rate 0 Expected packet rate must be
configured.
12 watchdog_timeout_action 0 Transition to the Timed Out state.
13 produced_connection_path_
length
6 —
14 produced_connection_path ARRAY
of hex
USINTS
Default value is specified by the Poll
Response Setup Attribute (ID #6) in
the Device Configuration Object (see
page 71). See Table 31, page 63.
15 consumed_connection_path_
length
0 —
* For INT data assembly.
(Continued on next page)
Table 30: I/O Poll Messaging Instance Attributes (continued)
Attribute
Attribute Name
Default
Description
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com