Accessing Camera Data3.5.4
The following options facilitate access to the stored image and video sequences on a
MicroSD card:
• Play back the recorded event images without sound directly
from the MicroSD card using the Playback view of the camera software.
• Play back the recorded video sequences with audio by accessing the
MicroSD card in the MOBOTIX camera via the camera.
In MxControlCenter:
•
Play back the recorded video sequences with audio by accessing
the MicroSD card in the MOBOTIX camera via the camera or with a direct access to
the MicroSD card via a card reader connected to the computer. Access the card by
setting the MicroSD card's drive/volume as a in MxControlCenter.
If the MicroSD card's contents are encrypted, you need to enter the corresponding password
before you can access the recorded video data. In MxControlCenter or MxEasy, a dialog
will automatically prompt you for this purpose.
Caution
When
camera, you need to make sure that the time on the original camera is in sync with
the new camera. We recommend using automatic time synchronization via a time
server (Admin Menu > Date and Time).
3.5.5
Follow these steps to deactivate the memory on a MicroSD card (Admin Menu > Storage
):
Activate the
1. None option.
Click on the
2. Set button at the bottom of the dialog and then Close.
Reboot the camera (
3. Admin Menu > Reboot Camera).
Once the camera has rebooted, make sure that the symbol FR REC is no longer visible in
the bottom right-hand corner of the live image.
You can now safely remove the MicroSD card from the camera (see Chapter 2).
4.
To Next Page
