2.3.2
The following cables can be used with the D14:
•
: This MOBOTIX cable is pre-installed at delivery
and is intended for direct connection to a network outlet. If the D14D is
to be installed outdoors, the MOBOTIX should be
used (optional accessory).
• : This MOBOTIX cable
provides the required impermeability, even in adverse weather conditions,
and thereby prevents corrosion of the connections.
• : Additional MOBOTIX modules
can be connected via this multi-wire cable in the future. The wires of this
cable are led along the bottom of the camera and then pushed through
the sealing membranes and into the cable guides.
Caution
to ensure
that the cable cover remains permanently sealed.
Note
Appliances with a combined maximum power consumption of 2.5 W may be connected
to the MxBus connector. If additional devices are connected to the MxBus connector and
to the Mini USB connector, the power consumption of all connected devices may not
amount to more than 4 W. If additional modules are connected, which in total consume
more than 1 W, the maximum environmental temperature is limited to 50°C (122°F).
To Next Page
Loading...
