Mobotix D14D - Overview of Network Connection; Power over Ethernet (Poe Conforming to IEEE 802.3 Af)

46/126
D14D Camera Manual: Mounting

www.mobotix.com • sales@mobotix.com
2.2
2.2.1
All D14D models are supplied with power using the PoE standard. The PoE Adapter Set
(MX-NPA-PoE Set) may be used for smaller installations. For larger installations, it is worth
investing in a PoE-capable supply device available on the market. 


Caution
The  of the network cable for power supply over an Ethernet cable
is
100 m.
 such as the NPA Set, Power Box
or Power Rack (MX-NPA-Set, MX-NPR-4 and MX-NPR8/20) are not suitable for use
with the D14D.
Note
The MOBOTIX D14D can be powered by switches or routers that support the PoE
(Power over Ethernet) standard and conform to IEEE 802.3af.

Advantages of centralized backup power supply are available via network•
Lower, more cost-eective power consumption•
Camera does not require an additional network connection •
The D14D supports
the Power over
Ethernet standard
IEEE 802.3af (PoE)
The PoE adapter
replaces the crossover
cable when directly
connecting to a computer
PoE Adapter
MX-NPA-PoE
 
CAMERA
For the D14D, you
should use the new blue
MX-NPA-PoE-Set –
previous MOBOTIX
network power
accessories such as the
NPA Set, Power Box,
and Power Rack
(MX-NPA-Set,
MX-NPR-4 and
MX-NPR8/20) are
not suitable for use
with the D14D