94/126
www.mobotix.com • sales@mobotix.com
Virtual PTZ And Full Image Recording3.3
Virtual PTZ3.3.1
The virtual PTZ function allows you to use a mouse or joystick to continuously zoom in on
images from the selected video source and “virtually” move the enlarged image section
within the entire image sensor area.
The vPTZ function of the camera can be controlled in the browser using the mouse. By
clicking any position on the image displayed on the monitor, this position becomes the
new image center. The image moves and is corrected accordingly. The can
be used to control the zoom function. This functionality is disabled in the default settings
of the camera and must therefore first be activated. To do so, go to Setup Menu > vPTZ
Settings and uncheck the item. Then save the settings by
clicking on Set and Close. You can now use the scroll wheel to or
.
To Next Page
Loading...
