Mobotix D14D - Using a Microsd Card in a Different MOBOTIX Camera; Limitations on Warranty When Using Flash Storage Media

109/126
MicroSD Card Recording

www.mobotix.com • sales@mobotix.com
Caution
A 
 to MicroSD card and . Failing to do so may
lead to loss of data!
Removing connected flash storage devices from the camera without properly
deactivating them may lead to data loss and/or destroy certain areas of the storage
device. Due to MxFFS formatting, this is limited to 4 MB of lost data per incident.
Using A MicroSD Card In A Dierent MOBOTIX Camera3.5.6
A MicroSD card containing recorded video data from a MOBOTIX camera can be inserted
into any MicroSD card-enabled MOBOTIX camera. Once MicroSD card recording has been
activated (requires a reboot), the “new” MOBOTIX camera automatically synchronizes
with the card and resumes recording. Note that no data is lost in this process. Make sure
that you deactivate MicroSD card recording before removing the card and then reboot
the MOBOTIX camera.
If the MicroSD card's contents are encrypted, you need to enter the correct password in
the “new” camera in the

dialog box. Otherwise, the camera cannot access the MicroSD card.
3.5.7
MOBOTIX will not assume any responsibility for flash storage devices (for example,
MicroSD cards or connected USB storage devices) delivered with or integrated into
MOBOTIX cameras. The same applies to damage to flash storage devices or damage
resulting from the use of devices that are not supplied by MOBOTIX.