The absence of mechanically moving parts, heating and ventilation means that D14D
cameras requires less than 5 watts of power, which can therefore be easily supplied via a
standard PoE cable. Cleaning the D14D is simple enough – wipe the dome using a lint-free
cotton cloth and a mild household detergent without abrasive particles.
Combined with the Outdoor Wall Mount, which is available as an accessory, the D14D
is compliant with the higher protection class IP65 (fully dustproof and resistant to water
jets) and can then be easily used in any unprotected outdoor areas. MOBOTIX oers an
additional Corner and Pole Mount that allows the Outdoor Wall Mount to be attached to
the corners of buildings and to masts.
The Outdoor Wall Mount’s design enables, for example, WiFi or GSM/GPRS modules to be
installed directly within the weatherproof housing without disturbing the overall appearance
of the surveillance unit. Similarly, relays for alarm sirens or lights can be installed easily
and elegantly within the housing.
The Outdoor Wall Mount is made from PBT-30GF (polyethylene terephthalate with 30%
fiberglass). This material, which is often used in the automotive industry, is stable and
resistant to high temperatures, UV rays, other environmental factors, chemicals, etc. The
purely software-based design of the MOBOTIX D14D and free software updates ensure
that the surveillance system has a long product life and therefore a high return on investment.
To Next Page
Loading...
