Mocon Dansensor Lippke 4500 - Page 42

Dansensor A/S COPYRIGHT © P/N 330654-E 01/2018
Lippke 4000/4500 EN User Guide 41
With CO2 measurement * Requires a PacCheck 3XX - If checked the CO
2
level is measured.
Limit CO2 [%] * Upper limit for acceptable CO
2
measurement.
Displayed limits in chart:
Pressure, upper limit in chart
[mbar] *
Upper pressure value for the [mbar] axis in the resulting graph chart
Pressure, lower limit in chart
[mbar] *
Lower pressure value for the [mbar] axis in the resulting graph chart
Limits:
Limit [mbar]
(Pressure drop)
The maximum allowed pressure drop during the leak test.