Mocon Dansensor Lippke 4500 - Cleaning and Maintenance

P/N 330654-E 01/2018 COPYRIGHT © Dansensor A/S
66 User Guide EN Lippke 4000/4500
Display of test results
At the end of each test the test result will be displayed on the screen.
Burst test result
A Burst test can either be failed or passed. The test result is displayed as the pressure where the
package bursts and whether the test is passed or failed. The test is passed if the package bursts at a
pressure that is within the set pressure limits - see detailed test description in "Burst test" on page 36.
Leak test result
A Leak test can either be failed or passed. The test is failed if the pressure drop in the package is too high
over a set period of time - see detailed test description in "Leak test" on page 39.
Creep test result
A Creep test can either be failed or passed. The test is failed if the package bursts within a set period of
time - see detailed test description in "Creep test" on page 42.
Creep2Fail test result
A Creep2Fail test can either be failed or passed. The test is failed if the package bursts outside the set
time limits - see detailed test description in "Creep2Fail test" on page 45.
BURST-2 Supervisor
Test result 0000:26
LEAK-2 Supervisor
Test result 0004:26
LEAK-2 Supervisor
Test result 0004:26
CREEP-2 Supervisor
Test result 0000:56
CREEP-2 Supervisor
Test result 0000:26
C2F-2 Supervisor C2F-2 Supervisor
Test result Test result