10 | P a g e
2 Description of the product
2.1 Purpose of the Product
The Mopec Maestro™ Encore is the most advanced pathology workstation on the market today and is designed with the
special needs of the user in mind. Careful consideration is given to the functional requirements and workflow patterns,
as well as the need for maximum space utilization and sanitation.
The Maestro™ offers a host of comfort and convenience features:
an adjustable height worksurface, a well-lighted work area, hand-free or manual controls for water, disposal, and
efficient exhaust options.
2.2 Process Overview
The Maestro is for grossing study and is not intended to be used as a medical device where tissue comes into contact
with a patient. The actual grossing process is defined by each facility and is not the responsibility of Mopec.
2.3 Technical Data
The Maestro products are designed and manufactured under the guidelines:
• ISO 9001:2015 with Design – Mopec facility located at 800 Tech Row, Madison Heights MI USA.
2.4 Operating Specifications for the Unit
• Temperature range: 70.0±10.0°F or 21.0±6.0°C
• Relative humidity range: RH 35%-75%
• Elevation Range: 0-2000m
• Domestic Electrical Specification: 115v/1ph/60hz on (1) 15a dedicated circuit
o Full Load FLA= 7.2A Nominal= 3.2A
• Export Electrical Specification: 220v/1ph/60hz on (1) 10a dedicated circuit.
• IEC320 C13 Hospital-Grade Power Cord with three prongs UL Listed: 14AWG, 6’ in length 15A @ 115v/ 10A
@ 220v or equivalent must be used to power the unit.
• Water Supply Range: 50 -100 psi, 6GPM min, 45 -120°F (7-48°C)
• Maximum worksurface load: 200lbs or 91kg
• Ingress protection (IP) rating: IP40
• Workstation Configuration weight: Range from 696-1220lbs (315-553Kg)
• Height of Unit: 75” (1.9m) at lowest height position & 87” (2.2m) at highest elevated position.
2.5 Product Compliance
The Maestro products are designed, and manufactured under the guidelines:
To Next Page
Loading...
